Publications

Jeffrey S. Russell, Ph.D., P.E., Dist.M.ASCE, NAC, F.NSPE

Refereed Papers

1. Russell, J. S. and Skibniewski, M. J.: “Decision Criteria in Contractor Prequalification,” ASCE Journal of Management in Engineering, Vol. 4, No. 2, April 1988, pp. 148-164.

2. Skibniewski, M. J. and Russell, J. S.: “Robotics Applications to Construction,” AACE Journal of Cost Engineering, Vol. 31, No. 6, June 1989, pp. 10-18.

3. Russell, J. S.: “Model for Owner Prequalification of Contractors,” ASCE Journal of Management in Engineering, Vol. 6, No. 1, January 1990, pp. 59-75.

4. Russell, J. S. and Skibniewski, M. J.: “QUALIFIER-1: Contractor Prequalification Model,” ASCE Journal of Computing in Civil Engineering, Vol. 4, No. 1, January 1990, pp. 77-90.

5. Russell, J.S.: “Model for Owner Prequalification of Contractors,” ASCE Journal of Management in Engineering, Vol. 6, No. 1, January 1990, pp. 59-75.

6. Russell, J. S., Skibniewski, M. J., and Cozier, D. R.: “QUALIFIER-2: Knowledge-Based System for Contractor Prequalification,” ASCE Journal of Construction Engineering and Management, Vol. 116, No. 1, March, 1990, pp. 155-169.

7. Russell, J. S. and McCullouch, B. G.: “Civil Engineering Education: Case Study Approach,” ASCE Journal of Professional Issues in Engineering, Vol. 116, No. 2, April 1990, pp. 164-174.

8. Russell, J. S.: “Surety Industry: Overview,” ASCE Journal of Management in Engineering, Vol. 6, No. 3, July 1990, pp. 323-341.

9. Russell, J. S., Skibniewski, M. J., and Vanegas, J. A.: “A Framework for a Construction Robot Fleet Management System,” ASCE Journal of Construction Engineering and Management, Vol. 116, No. 3, September 1990, pp. 448-462.

10. Russell, J. S. and Skibniewski, M. J.: “An Ergonomic Analysis Framework for Construction Tasks,” Journal of Construction Management and Economics, Vol. 8, No. 3, September 1990, pp. 329-338.

11. Russell, J. S.: “Surety Bonding and Owner-Contractor Prequalification: Comparison,” ASCE Journal of Professional Issues in Engineering, Vol. 116, No. 3, October 1990, pp. 360-374.

12. Russell, J. S., Benson, C. H., and Fox P. J.: “A Stochastic Decision Model for Contractor Prequalification,” Journal of Microcomputers in Civil Engineering, Vol. 5, No. 4, December 1990, pp. 285-297.

13. Russell, J. S.: “Decision Analysis Framework for Evaluating Highway Contractors,” Transportation Research Record, No. 1282, Materials and Construction, Transportation Construction 1990, Transportation Research Board National Research Council, pp. 66-75.

14. Russell, J. S.: “Insurance Industry: Overview,” ASCE Journal of Management in Engineering, Vol. 7, No. 1, January 1991, pp. 98-118.

15. Russell, J. S.: “The Challenge: Recruiting Students to Civil Engineering,” ASCE Journal of Professional Issues in Engineering, Vol. 117, No. 1, January 1991, pp. 21-26.

16. Russell, J. S.: “Construction Contract Bonds,” ASCE Journal of Management in Engineering, Vol. 7, No. 3, July 1991, pp. 299-313.

17. Russell, J. S.: “Contractor Failure: Analysis,” ASCE Journal of Performance of Constructed Facilities, Vol. 5, No. 3, August 1991, pp. 163-180.

18. Skibniewski, M. J. and Russell, J. S.: “Construction Robot Fleet Management System Prototype,” ASCE Journal of Computers in Civil Engineering, Vol. 5, No. 4, October, 1991, pp. 1-20.

19. Russell, J. S.: “Cooperative Education: One Perspective,” ASCE Journal of Professional Issues in Engineering, Vol. 117, No. 4, October 1991, pp. 1-17.

20. Jaselskis, E. J. and Russell, J. S.: “An Efficiently Structured Approach for Selection of Most Promising Construction Contractors,” Project Management Institute (PMI), Vol. XXII, No. 4, December 1991, pp. 31-38.

21. Russell, J. S.: “Underwriting Process for Construction Contract Bonds,” ASCE Journal of Management in Engineering, Vol. 8, No. 1, January 1992, pp. 63-80.

22. Russell, J. S., Hancher, D. E., and Skibniewski, M. J.: “Contractor Prequalification Data for Construction Owners,” Journal of Construction Management and Economics, Vol. 10, No. 1, January 1992, pp. 117-135.

23. Russell, J. S.: “Decision Models for Analysis and Evaluation of Construction Contractors,” Journal of Construction Management and Economics, Vol. 10, No. 2, March 1992, pp. 185-202.

24. Adams, T.M., Vonderohe, A.P., Russell, J.S., and Clapp, J.L.: “Integrating Facility Delivery through Spatial Information,” Journal of Urban Planning and Development, Vol. 118, No. 1, March 1992, pp. 13-23.

25. Russell, J. S. and Radtke, M. W.: “Communication Process between DBE Firms and Prime Contractors,” Transportation Research Record, No. 1310, Materials, Construction, and Maintenance, Construction Innovations 1991, Transportation Research Board National Research Council, pp. 65-72.

26. Adams, T. M., Vonderohe, A. P., Russell, J. S., and Clapp, J. L: “Geographic Information Systems Applied to the Facility Delivery Process,” ASCE Journal of Urban Planning and Development, Vol. 118, No. 1, March 1992, pp. 13-23.

27. Russell, J. S. and Casey, J. J.: “Design Engineer/Contractor Bankruptcy: Considerations for Debtor and Creditors,” ASCE Journal of Management in Engineering, Vol. 8, No. 3, July 1992, pp. 278-297.

28. Russell, J. S. and Severson, G. D.: “Analysis and Evaluation of a Plan Quality Evaluation Form,” Transportation Research Record, No. 1351, Materials and Construction – Construction Quality and Construction Management, 1992, Transportation Research Board National Research Council, pp. 78-86.

29. Russell, J. S. and Jaselskis E. J.: “Quantitative Study of Contractor Evaluation Programs and Their Impact on Project Outcome,” ASCE Journal of Construction Engineering and Management, Vol. 118, No. 3, September 1992, pp. 612-624.

30. Russell, J. S. and Jaselskis E. J.: “Predicting Construction Contractor Failure Prior to Contract Award,” ASCE Journal of Construction Engineering and Management, Vol. 118, No. 4, December 1992, pp. 791-811.

31. Jaselskis E. J. and Russell, J. S.: “Risk Analysis Approach to Selection of Contractor Evaluation Method,” technical note, ASCE Journal of Construction Engineering and Management, Vol. 118, No. 4, December 1992, pp. 814-821.

32. Russell, J. S., Gugel, J. G., and Radtke, M. W.: “Documented Constructability Savings for Petrochemical-Facility Expansion,” ASCE Journal of Constructed Facilities, Vol. 7, No. 1, February 1993, pp. 27-45.

33. Jeljeli, M., Russell, J. S., Meyer, H. W., and Vonderohe, A. P.: “Application of Geographic Information Systems to Construction,” ASCE Journal of Construction Engineering and Management, Vol. 119, No. 1, March 1993, pp. 72-86.

34. Jeljeli, N.M., Russell, J.S., and Meyer, W.G., and Vonderohe, A.P.: “Potential Applications of Geographic Information Systems to Construction Industry,” Journal of Construction Engineering and Management, Vol. 119, No. 1, March 1993, pp. 72-86.

35. Radtke, M. W. and Russell, J. S.: “Project-Level Model Process for Implementing Constructability,” ASCE Journal of Construction Engineering and Management, Vol. 119, No. 4, December 1993, pp. 813-831.

36. Russell, J. S. and Gugel, J. G.: “Comparative Analysis of Two Corporate Constructability Programs,” ASCE Journal of Construction Engineering and Management, Vol. 119, No. 4, December 1993, pp. 769-784.

37. Severson, G. D., Jaselskis, E. J., and Russell, J. S.: “Trends in Construction Contractor Financial Data,” technical note, ASCE Journal of Construction Engineering and Management, Vol. 119, No. 4, December 1993, pp. 854-858.

38. Skibniewski, M. J., Kunigahalli, R.S., and Russell, J. S.: “Managing Multiple Construction Robots with a Computer,” Journal of Automation in Construction, No. 2, 1993, pp. 199-216.

39. Russell, J. S., Swiggum, K. E., Shapiro, J. M., and Alaydrus, A. F.: “Constructability Related to TQM, Value Engineering, and Cost/Benefits,” ASCE Journal of Performance of Constructed Facilities, Vol. 8, No. 1, February 1994, pp. 31-45.

40. Russell, J. S., Gugel, J. G., and Radtke, M. W.: “Comparative Analysis of Three Approaches to Constructability Implementation,” ASCE Journal of Construction Engineering and Management, Vol. 120, No. 1, March 1994, pp. 180-195.

41. Casey, J. J. and Russell, J. S.: “Owner’s Perspective: Transferring Ownership of a Design Engineering/Construction Firm,” ASCE Journal of Management in Engineering, Vol. 10, No. 2, March/April 1994, pp. 66-76.

42. Elton, D. J., Juang, C. H., and Russell, J. S.: “Contractor Prequalification Using Fuzzy Sets,” Civil Engineering Systems, Vol. II, 1994, pp. 1-17.

43. Kunigahalli, R., Russell, J. S., and Skibniewski, M. J.: “Motion Planning For Automated Construction,” Journal of Automation in Construction, Special Issue, No. 3, May 1994, pp. 71-78. *Selected as one of the best papers presented at the 10th International Symposium on Automation and Robotics in Construction held in Houston, Texas on May 23-26, 1993. A total of 71 papers were published in the conference proceedings. Eleven were selected as the best papers from the conference.

44. Severson, G. D., Russell, J. S., and Jaselskis E. J.: “Predicting Construction Contract Surety Bond Claims Using Financial Data,” ASCE Journal of Construction Engineering and Management, Vol. 120, No. 2, June 1994, pp. 405-420.

45. Gugel, J. G. and Russell, J. S.: “Constructability Analysis Selection Tool,” ASCE Journal of Construction Engineering and Management, Vol. 120, No.3, September 1994, pp. 509-521.

46. Swiggum, K. E., Anderson, S. D., and Russell, J. S.: “Case Study of Burlington Cable-Stayed Bridge,” ASCE Journal of Construction Engineering and Management, Vol. 120, No. 3, September 1994, pp. 649-666.

Selected for the 1996 ASCE Thomas Fitch Rowland Prize.

47. Gugel, J.G. and Russell, J.S.: “Model for Constructability Approach Selection,” Journal of Construction Engineering and Management, Vol. 120, No. 3, September 1994, pp. 509-521.

48. Kunigahalli, R., Russell, J. S., and Veeramani, D.: “An Algorithm to Extract Topological Relationships From a Wire-Frame CAD Model of Concrete Floors,” ASCE Journal of Computing in Civil Engineering, Vol. 9, No. 1, January 1995, pp. 29-42.

49. Taha, M. A., Park, S. C., and Russell, J. S.: “Knowledge-Based DSS for Construction Contractor Prescreening,” European Journal of Operational Research, Vol. 9, No. 1, January 1995, pp. 29-42.

50. Kunigahalli, R. and Russell, J. S.: “Framework for Development of CAD/CAC Systems,” Journal of Automation in Construction, No. 3, 1995, pp. 327-340.

51. Kunigahalli, R. and Russell, J. S.: “ Sequencing For Concrete Placement Using RAG-CAD Data Structure,” ASCE Journal of Computing in Civil Engineering, Vol. 9, No. 3, July 1995, pp. 216-225.

52. Ahmad, I., Russell, J. S., and Abou-Zeid, A.: “Information Technology and Integration in the Construction Industry,” Journal of Construction Management and Economics, Vol. 13, No. 2, March 1995, pp. 163-171.

53. Kunigahalli, R., Russell, J. S., and Tserng, H. P.: “Motion Planning for an Autonomous Compactor in a Waste Landfill Site,” Journal of Microcomputers in Civil Engineering, Vol. 10, No.5, June 1995, pp. 365-382.

54. Alaydrus, A., Hanna, A., Russell, J. S., and Wortley, C. A.: “Salvaging and Re-Using Jacket and Deck Structures of Fixed Off-Shore Platforms,” ASCE Journal of Infrastructure Systems, Vol. 1, No.3, September 1995, pp. 178-185.

55. Jeljeli, M. and Russell, J. S.: “Coping With Uncertainty in Environmental Construction: A Decision Analysis Approach,” ASCE Journal of Construction Engineering and Management, Vol. 121, No. 4, December 1995, pp. 370-380.

56. Taha, M. A., Park, S. C., and Russell, J. S.: “Knowledge-Based DSS for Construction Contractor Prescreening,” European Journal of Operation Research, Vol. 84, No. 1, July, 1995, pp. 35-46.

57. Abou-Zeid, A., Russell, J. S., Hanna A. S., and Park, S. C.: “Data Flow Model for Communication between Project Participants in a Highway Bridge Project,” Canadian Journal of Civil Engineering, December 1995, Vol. 22, pp. 1224-1234.

58. Schmitt, R.L., Whited, G.C., Waelti, G.J., Hanna, A.S., Russell, J.S., and Bahia, H.U.: “Current initiatives in Quality Asphaltic Pavement Construction: The Wisconsin Experience,” Transportation Research Record, No. 1543, Design and Construction of Asphaltic Overlays and Hot-Mix Asphalt Construction Practices, 1996, Transportation Research Board, National Council, pp. 120-124.

59. Jaselskis, E.J., Anderson, S.A., and Russell, J.S.: “Strategies for Achieving Excellence in Construction Safety Performance,” ASCE Journal of Construction Engineering and Management, Vol. 122, No.1, March 1996, pp. 61-70.

60. Russell, J. S. and Zhai, H.: “Predicting Contractor Failure Using Stochastic Dynamics of Economic and Financial Variables,” ASCE Journal of Construction Engineering and Management, Vol. 122, No. 2, June 1996, pp. 183-191.

61. Lawrence, S.P., Hanna, A.S., and Russell, J.S.: “Performance of Polyethylene Parting Strips in PCC Pavements,” ASCE Journal of Transportation Engineering, Vol. 122, No. 2, March/April 1996, pp. 155-163.

62. Tserng, H.P., Kunigahalli, R., and Russell, J.S.: “OPSALC: A Computer-Integrated Operations Planning System for Autonomous Landfill Compaction,” Journal of Automation in Construction, Special Issue, No. 3, May 1996, pp. 39-50.

63. Russell, J.S., Western, J.L., Adams, R.E., Lindberg, H.A., and McComb, D.E.: “Changing the Face of Research: Partnering with Industry and Academia at WISDOT,” Transportation Research Record, No. 191, 1997, Transportation Research Board, National Council, pp. 10-12, 29.

64. Russell, J.S., Jaselskis, E.J., and Lawrence, S.P.: “Continuous Assessment of Project Performance,” ASCE Journal of Construction Engineering and Management, Vol. 123, No. 1, March 1997, pp. 64-71.

65. Schmitt, R.L., Hanna, A.S., Russell, J.S., and Nordheim, E.V.: “Pavement Density Measurement Comparative Analysis Using Core and Nuclear Methods,” Association of Asphalt Paving Technologists (AAPT), Vol. 66, 1997, pp. 379-406.

66. Schmitt, R.L., Hanna, A.S., and Russell, J.S.: “Improving Asphalt Paving Productivity,” Transportation Research Record, No. 1575, Construction: Flexible Pavements, Bridges, Quality and Management, Jan. 1997, Transportation Research Board, National Research Council, pp. 25-33.

67. Russell, J.S., Pfatteicher, S.A., and Meier, J.R.: “Improved Management of the Engineering Educational Process,” ASCE Journal of Management in Engineering, Vol. 13, No. 6, November/December 1997, pp. 37-41.

68. Flack, D.A., Russell, J.S., Bates, C.D., and Hayden, W.M.: “The Case for a Technology Management Institute,” ASCE Journal of Management in Engineering, Vol. 14, No. 1, January/February 1998, pp. 26-28.

69. Hanna, A.S., Russell, J.S., and Thomack, D.J.: “Impact of Change Orders on Electrical Construction Contractors,” Cost Engineering, Vol. 39, No. 1, February 1998, pp. 36-41.

70. Kunigahalli, R., Veeramani, D., and Russell, J. S.: “Computer Aided Process Planning for CNC Pumped-Concrete Placement,” Journal of Microcomputers in Civil Engineering, Journal of Computer-Aided Civil and Infrastructure Engineering, Vol. 13, No. 4, July 1998, pp. 275-288.

71. Veeramani, D., Tserng, H.P., and Russell, J.S., “Computer-Integrated Collaborative Design and Operation in the Construction Industry,” Journal of Automation in Construction, Vol. 7, No. 6, September 1998, pp. 485-492.

72. Russell, J.S., and Flack, D.A.: “Seminar Review: Applying Technology in Project Management and Product Design,” ASCE Journal of Management in Engineering, Vol. 14, No. 5, September/October 1998, pp. 35-37.

73. Bosscher, P.J., Bahia, H.U., Thomas, S., and Russell, J.S.: “Relationship Between Pavement Temperature and Weather Data: A Wisconsin Field Study to Verify Superpave Algorithm,” Transportation Research Board, Record No. 1609, Materials and Construction Superpave Binder Specifications, Mixture Design, and Construction, Transportation Research Board National Research Council, 1998, pp. 1-11.

74. Russell, J.S., Jaselskis, E.J., Anderson, S.A., and Hendrickson, M.L.: “Challenges and Opportunities in Construction: A Construction Congress V Summary,” ASCE Practice Periodical on Structural Design and Construction, Vol. 3, No. 4, November/December 1998, pp. 164-171.

75. Russell, J.S., Jaselskis, E.J., Anderson, S.D., and Hendrickson, M.L.: “A Summary of Construction Congress V,” ASCE Journal of Management in Engineering, Vol. 14, No. 6, November/December 1998, pp. 27-30.

76. Schmitt, R.L., Russell, J.S., Hanna, A.S., Bahia, H.U. and Jung, G.: “Summary of Current Practices for Hot-Mix Asphalt Construction Quality Control/Quality Assurance for Hot Mix Asphalt,” Transportation Research Board, Record No. 1632, Materials and Construction Quality and Management, Transportation Research Board National Research Council, 1998, pp. 22-31.

77. Krishnamurthy, B.K., Tserng, H., Schmitt, R.L., Russell, J.S., Bahia, H.U., and Hanna, A.S.: “AutoPave: Towards an Automated Paving System for Asphalt Pavement Compaction Operations,” Journal of Automation in Construction, Vol. 8, No. 2, 1998, pp. 165-180.

78. Vandenberg, P., Hanna, A.S., and Russell, J.S.: “Impact of Change Orders on Mechanical Construction Labor Efficiency,” ASCE Journal of Construction Management and Economics, Vol. 17, No. 6, 1998, pp. 721-730.

79. Bahia, H.U., Friemel, T.P., Peterson, P.A., and Russell, J.S.: “Optimization of Constructability and Resistance to Traffic: A New Design Approach for HMA Using the Superpave Compactor,” Journal of the Association of Asphalt Paving Technologists, Vol. 67, 1998, pp. 189-232.

80. Zhai, H. and Russell, J.S.: “Stochastic Modeling and Prediction of Contractor Default Risk,” Journal of Construction Management and Economics, Vol. 17, No. 5, 1999, pp. 563-576.

81. Hanna, A.S., Russell, J.S., Gotzion, T., and Nordheim, E.V.: “Impact of Change Orders on Labor Efficiency for Mechanical Construction,” ASCE Journal of Construction Engineering and Management, Vol. 125, No. 3, 1999, pp. 176-184.

82. Russell, J.S., Hanna, A.S., Anderson, S.D., Wisley, P.W., and Smith, R.J.: “The Warranty Alternative,” Civil Engineering—ASCE, Vol. 69, No. 5, May 1999, pp. 60-63.

83. Bosscher, P.J., Foose, E.M., and Russell, J.S.: “Estimating Bearing Capacity of Piles Installed with Vibratory Drivers” National Geotechnical Experimentation Sites, No 93, 2000, pp. 279-305.

84. Abudayyeh, O., Russell, J., Johnston, D., and Rowings, J., “Construction Engineering and Management Undergraduate Education,” ASCE Journal of Construction Engineering and Management, Vol. 126, No. 3, 2000, pp. 169-175.

85. Meier, J. and Russell, J.S.: “Model Process for Implementing Maintainability,” ASCE Journal of Construction Engineering and Management, Vol. 126, No. 6, 2000, pp. 440-450.

86. Shr, J.F., Thompson, B.P., Russell, J.S. and Ran, B.: “Determining Minimum Contract Time for Highway Projects,” ASCE Journal of Professional Issues in Engineering Education and Practice,” Vol. 126, No. 2, 2000, pp. 54-64.

87. Tserng, H.P., Ran, B., and Russell, J.S.: “Interactive Path Planning for Multi-Equipment Landfill Operations,” Journal of Automation in Construction, Vol. 10, No. 1, 2000, pp. 155-168.

88. Norton, J.W., Nixon, W.A., Russell, J.S., Stouffer, B., and Walesh, S.G.: “The First Professional Degree: A Historic Opportunity,” ASCE Journal of Professional Issues in Engineering Education and Practice, Vol. 126, No. 2, April 2000, pp. 54-63.

89. Russell, J.S., Stouffer, B., and Walesh, S.G.: “Closure of ‘The First Professional Degree: A Historic Opportunity,” ASCE Journal of Professionals Issues in Engineering Education and Practice, Vol. 127, No. 4, 2001, pp.199-201.

90. Moua, B. and Russell, J.S.: “Comparison of Two Maintainability Programs,” ASCE Journal of Construction Engineering and Management,” Vol. 127, No. 3, 2001, pp. 239-244.

91. Moua, B., and Russell, J.S.: “Evolution of Formal Maintainability Program for Large Manufacturing Company,” Journal of Performance of Constructed Facilities,” Vol. 15, No. 2, May 2001, pp. 46-53.

92. Schmitt, R.L., Hanna, A.S., Russell, J.S., and Nordheim, E.V.: “Analysis of Bias in HMA Field Split-Sample Testing,” Journal of the Association of Asphalt Paving Technologists, Vol. 70, 2001, pp. 273-300.

93. Schmitt, R.L., Hanna, A.S., Russell, J.S., and Nordheim, E.V.: “Statistically-Based Methods for Verification Testing,” Journal of Transportation Research Record, No. 1761, 2001, pp. 86-92.

94. Her, M.B., and Russell, J.S.: “Maintainability Implemented by Third-Party Contractor for Public Owner,” ASCE Journal of Management in Engineering, Vol. 18, No. 2, April 2002, pp. 95-102.

95. Thompson, B., Anderson, S., Russell, J., and Hanna, A.: “Guidelines for Warranty Contracting for Highway Construction,” ASCE Journal of Management in Engineering, Vol. 18, No. 3, July 2002, pp. 103-155.

Selected as the Outstanding Paper in the ASCE Journal of Management in Engineering in 2002.

96. Hanna, A.S. and Russell, J.S.: “Discussion of Impact of Change Orders on Labor Efficiency for Electrical Construction,” ASCE Journal of Construction Engineering and Management, Vol. 128, No.4, July/August 2002, pp. 362-364.

97. Dieter, D.A., Dietsche, J.S., Bank, L.C., Oliva, Michael G., and Russell, J.S. “Concrete Bridge Decks Constructed with Fiber-Reinforced Polymer Stay-in-Place Forms and Grid Reinforcing,” Transportation Research Record, Transportation Research Board, No. 1814, pp. 219-226.

98. Bank, L.C., Gentry, R.T., Thompson, B.P., and Russell, J.S.: “Model Specification for Composites for Civil Engineering Structures,” Transportation Research Record, Transportation Research Board, No. 1814, pp. 227-236.

99. Russell, J.S., Walesh, S.G., Anderson, R.O., Buehring, N.L., Duncan, A.D., Durrant, J.E., Esslinger, J.C., Galloway, G.E., Maples, B.A., Parsons, B.K., Price, B.E., and Lenox, T.: “Policy Statement 465: Why We Must Raise the Bar,” Civil Engineering, Vol. 72, No. 4, April 2002, pp. 60-65, 94-95.

100. Kim, S.K. and Russell, J.S.: “Framework for an Intelligent Earthwork System Part I. System Architecture,” Journal of Automation in Construction, Vol. 12, No. 1, January 2003, pp. 1-14.

101. Kim, S.K. and Russell, J.S.: “Framework for an Intelligent Earthwork System Part II. Task Identification/Scheduling and Resource Allocation Methodology,” Journal of Automation in Construction, Vol. 12, No. 1, January 2003, pp. 15-29.

102. Ammar, A., Hanna, A.S., Nordheim, E.V., and Russell, J.S.: “Indicator Variables Model of Firm’s Size-Profitability Relationship of Electrical Contractors using Financial and Economic Data,” ASCE Journal of Construction Engineering and Management, Vol. 129, No. 2, March/April 2003, pp. 192-197.

103. Kim, S.K., Russell, J.S., and Koo, K.J.: “Construction Robot Path-Planning for Earthwork Operations,” ASCE Journal of Computing in Civil Engineering, Vol. 17, No. 2, April 2003, pp. 97-104.

104. Russell, J.S. and Stouffer, W.B.: “Some Ethical Dimensions of Additional Education Beyond the Base,” ASCE Journal of Professional Issues in Education and Practice, Vol. 129, No., 4, October 2003, pp. 225-231.

105. Bank, L.C.; Gentry, T.R.; Thompson, B.P.; Russell, J.S.: “A model specification for FRP composites for civil engineering structures,” Construction and Building Materials, Vol. 17, No. 6-7, September/October, 2003, pp. 405-437.

106. Jang, H. S., Russell, J. S., Yi, J. S.: “A project manager’s level of satisfaction in construction logistics,” Canadian Journal of Civil Engineering, Vol. 30, No. 6, December, 2003, pp. 1133-1142.

107. Choi, J. S. and Russell, J. S.: “Economic Gains around Mergers and Acquisitions in the Construction Industry of the United States of America,” Canadian Journal of Civil Engineering, Vol. 31, No. 3, June, 2004, pp. 513-525.

108. Lee, D. K. and Russell, J.S.: “Panel Data Analysis of Factors Affecting As-Built Roughness of Asphaltic Concrete Pavements,” Journal of Transportation Engineering, Vol. 130, No. 4, July/August 2004, pp. 479-485.

109. Choi, J. S. and Russell, J. S.: “Long-Term Entropy and Profitability Change of United States Public Construction Firms,” ASCE Journal of Management in Engineering, Vol. 21, No. 1, January 2005, pp. 17-26.

110. Kanitpong, K., Bahia, H., Russell, J., and Schmidt, R.: “Predicting Field Permeability from Testing HMA Specimens Produced by Superpave Gyratory Compactor,” Journal of the Transportation Research Board, February 2005, pp. 52-58.

111. Russell, J.S. and Stouffer, W.B.: “Survey of the National Civil Engineering Curriculum,” Journal of Professional Issues in Engineering Education and Practice, ASCE, Vol. 131, No. 2, April 2005, pp. 118-128.

112. Russell, J.S., Park, H.K., and Han, S.H.: “Cash Flow Forecasting Model for General Contractors using Moving Weights of Cost Categories,” ASCE Journal of Management in Engineering, Vol. 21, No. 4, October 2005, pp. 164-172.

113. Russell, J.S.: “Mentoring in Engineering,” Leadership and Management in Engineering, ASCE, Volume 6, Issue 1, January 2006, pp. 34-37

Selected as the outstanding paper of 2006 for Leadership and Management in Engineering.

114. Ringelstetter, T.E., Bank, L.C., Oliva, M.G., Russell, J.S., Matta, F., and Nanni, A.: “Development of a Cost-Effective Structural FRP Stay-In-Place Formwork System for Accelerated and Durable Bridge Deck Construction,” Proceedings of 85th Annual Transportation Research Board Meeting, CD-ROM, Washington, DC, January 21-24, 2006.

115. Bank, L.C., Oliva, M.G., Russell, J.S., Jacobson, D.A., Conachen, M., Nelson, B., and McMonigal, D.: “Double Layer Prefabricated FRP Grids for Rapid Bridge Deck Construction: Case Study,” Journal of Composites for Construction, ASCE, Vol. 10, No. 3, 2006, pp. 204-212.

Selected as Best Applied Research Paper in the Journal in 2007.

116. Kim, S.K., Russell, J.S., and Koo, K.J.: “Closure to Construction Robot Path-Planning for Earthwork Operations,” Journal of Computing in Civil Engineering., ASCE, Vol. 20, No. 4, July/August 2006, pp. 302-303.

117. Berg, A.C., Bank, L.C., Oliva, M.G., and Russell, J.S.: “Construction and Cost Analysis of an FRP Reinforced Concrete Bridge Deck,” Journal of Construction and Building Materials Elsevier. Vol. 20, No.8, October 2006, pp. 515-526.

118. Russell, J. S., Hanna, A.S., Bank, L. C., and Shapira, A.: “Education in Construction Engineering and Management Built on Tradition: Blueprint for Tomorrow,” Journal of Construction Engineering and Management, ASCE, Vol. 133 No. 9, September 2007, pp. 661-668.

119. Bank, L.C., Malla, A.P., Oliva, M.G., Russell, J.S., Bentur, A. and Shapira, A.: “A Model Specification for Fiber Reinforced Non-Participating Permanent Formwork Panels for Concrete Bridge Deck Construction,” Construction and Building Materials, February 2008.

120. Russell, J.S. and Nelson, J.: “Completing the Circle of Professional Development through Leadership and Mentoring,” Leadership and Management in Engineering, ASCE, Vol. 9, No. 1, January 2009, pp. 40-42.

121. Lynch, D.R. and Russell, J.S.: “Experiential Learning in Engineering Practice,” Journal of Professional Issues in Engineering Education & Practice, ASCE, Vol. 135, No. 1, January 2009, pp. 31-39.

Selected as the Outstanding Paper in the Journal in 2009.

122. Lynch, D.R., Russell, J.S., Evans, J.C., and Sutterer, K.G.: “Beyond the Cognitive: The Affective Domain, Values and the Achievement of the Vision,” Journal of Professional Issues in Engineering Education & Practice, ASCE, Vol. 135, No. 1, January 2009, pp. 47-56.

123. Lynch, D.R., Russell, J.S., Mason, J.M., and Evans, J.C.: “Claims on the Foundation: Professionalism and its Liberal Base,” Journal of Professional Issues in Engineering Education & Practice, ASCE, Vol. 135, No. 3, July 2009, pp. 109-116.

124. Russell, J.S.: “Creating and Cultivating the Next Generation of Construction Professionals,” Advancing the Competitiveness and Efficiency of the U.S. Construction Industry, National Research Council of the National Academies, Oct 2009, pp. 95-114.

125. Bank, L.C., Galati, N., Jones, S.N., Matta, F., Nanni, A., Oliva, M.G., Orr, B.M., Ringelstetter, T.E., and Russell, J.S.: “Development and Field Testing of an FRP Composite Bridge Desk Comprising of Guard Rail System for Bridge 1480230, Greene County, MO,” National Technical Information Service, Transportation Research Board, Jan 2010.

126. Kim, S.K., Seo, J., and Russell, J.S.: “Intelligent Navigation Strategies for an Automated Earthwork System,” Automation in Construction, Vol. 21, Jan 2012, pp. 132-147.

127. Tserng, H.P., Russell, J.S., Hsu, C.W., and Lin, C.: “Analyzing the Role of National PPP Units in Promoting PPPs: Using New Institutional Economics and a Case Study,” Journal of Construction Engineering and Management, ASCE, Vol. 138, No. 2, February 2012, pp. 242-249.

128. Russell, J.S., Menassa, C.C., and McCloskey, E.: “Lifelong Learning to Leverage Project and Career Success: 21st Century Imperative,” Pract. Period. Struct. Des. Constr, ASCE, SPECIAL ISSUE: Construction Engineering: Leveraging Project and Career Success, Vol. 9, February 2014, pp. 137-141.

129. Laufer, A., Hoffman, E.J., Russell, J.S., and Cameron, W.S. (Spring 2015) “What Successful Project Managers Do,” MIT Sloan Management Review, 43-51.

130. Hanna, A., Ibrahim, M., Lotfallah, W., Iskandar, K., and Russell, J. (2016). “Modeling Project Manager Competency: An Integrated Mathematical Approach.” Journal of Construction Engineering and Management, 142(8): 04016029.

131. Hanna, A.S., Iskander, K.A., Lotfallah, W., Ibrahim, M.W., & Russell, J.S. (2017). “A Data-driven Approach for Identifying Project Manager Competency Weights,” Canadian Journal of Civil Engineering, 45(1): 1-8.

132. Abotaleb, I. S., El-Adaway, I. H., Ibrahim, M. W., Hanna, A. S., & Russell, J. S. (2019). “Causes, Early Warning Signs, and Impacts of Out-of-Sequence Construction: Expert-Based Survey Analysis.” ASCE Journal of Management in Engineering, 35(6): 04019030.

133. Abotaleb, I. S., El-Adaway, I. H., Ibrahim, M. W., Hanna, A. S., & Russell, J. S. (2020). “Developing a Rating Score for Out-of-Sequence Construction.” ASCE Journal of Management in Engineering, 36(3): 04020013.

134. Ibrahim, M. W., Hanna, A. S., & Russell, J. S., Abotaleb, I. S., El-Adaway, I. H. (2020).“Comprehensive Analysis of Factors Associated with Out-of-Sequence Construction.” ASCE Journal of Management in Engineering, 36(4): 04020031.

135. Ibrahim, M. W., Hanna, A. S., & Russell, J. S., Abotaleb, I. S., El-Adaway, I. H. (2020). “Quantitative Analysis of the Impacts of Out-of-Sequence Work on Project Performance.” ASCE Journal of Management in Engineering, 146(8): 04020090.

136. Ibrahim, M.; Labib, Y.; Veeramani, D.; Hanna, A.; Russell, Jeffrey S. (2021). “A Comprehensive Model for Construction Readiness Assessment.” ASCE Journal of Management in Engineering, 37(1): 04020088.

137. Russell, Jeffrey S.; El-adaway, Islam H.; Khalef, Ramy; Salih, Fareed; and Ali, Gasser (Resubmitted Nov 2022). “(PM 4.0) State of the Art Review: A Scientometric Analysis of the Project Management Evolution within the Construction Industry.” ASCE Journal of Construction Engineering and Management. Under Review.

Monographs or Book Chapters

1. Russell, J.S. and Kunigahalli, R.: The Civil Engineering Handbook, contributor to Construction Section, Co-authored chapter titled, “Construction Automation,” Published by CRC Press, Boca Raton, FL, 1994, pp. 130-162.

2. Hanna, A., Russell, J.S., Taha, M., and Park, S.C.: ASCE Artificial Neural Network Monograph, Co-authored construction application chapter titled, “Neural Network Applications to Construction Engineering and Management,” published by ASCE, New York, NY, 1997, pp. 124-136.

3. Taha, M.A., Abou-Zeid, A.M., Hanna, A.S. and Russell, J.S.: Artificial Neural Networks for Civil Engineers: Advanced Features and Applications, “Co-authored construction application chapter titled, “Merging genetic Algorithms with Neural Networks: Owner Contractor Prequalification Example,” published by ASCE, Reston, VA, 1998, pp. 247-259.

4. Russell, J.S., Kluender, S.J., and Thompson, M.K.: Mapping the Field of Adult & Continuing Education, Co-authored chapter titled, “Strategic Planning for Lifelong Learning,” Published by Stylus Publishing LLC, Sterling, VA, 2017, pp. 369-374.

Books

1. Russell, J.S.: Constructor Prequalification: Choosing the Best Constructor and Avoiding Constructor Failure, American Society of Civil Engineers Press, New York, N.Y., February 1996, 193 pgs.

2. Russell, J.S.: Surety Construction Contract Bonds, American Society of Civil Engineers Press, Reston, VA, March 2000, 500 pgs.

3. Russell, J.S.: Perspectives in Civil Engineering, Commemorating the 150th Anniversary of the American Society of Civil Engineers, Editor, American Society of Civil Engineers Press, Reston, VA, ISBN: 0-7844-0686-3, November 2003, 401 pgs.

4. Russell, J.S. & Lenox, T.A.: Raise the Bar: Strengthening the Civil Engineering Profession, Editor, American Society of Civil Engineers Press, Reston, VA, ISBN: 978-0-7844-1317-3 (paper), ISBN: 978-0-7844-7801-1 (eBook), March 2013, 270 pgs.

5. Laufer, Alex; Little, Terry; & Russell, Jeffrey; and Maas, Bruce: Becoming a Project Leader: Blending Planning, Agility, Resilience, and Collaboration. Palgrave Macmillan. ISBN: 978-3-319-66723-2 (hardcover), ISBN: 978-3-319-66724-9 (eBook), 2018, 136 pgs.

6. Russell, J.S., Nelson, John S. & Pferdehirt, Wayne P.: (2018). Technical Project Management in Living and Geometric Order: A Practical Perspective, Board of Regents of the University of Wisconsin System (eBook), 3rd edition, 325 pgs.

Contributed Papers at Conferences Published in Whole or by Abstract

1. Russell, J.S. and Chang, L.M.: “Methods for Construction Productivity Measurement,” Proceedings of Thirty First Annual Conference of the American Association of Cost Engineers, June 1987, Atlanta, GA, pp. K.1.1-K.1.10.

2. Russell, J.S. and Skibniewski, M.J.: “A Structured Approach to the Contractor Prequalification Process in the U.S.A.,” Proceedings of CIB-SBI Fourth International Symposium on Building Economics, September 1987, Copenhagen, Denmark, pp. 240-251.

3. Russell, J.S. and Skibniewski, M.J.: “An Expert System for Contractor Prequalification,” Proceedings of Computing in Civil Engineering: Microcomputers to Supercomputers, American Society of Civil Engineering Fifth Conference on Computing in Civil Engineering, March 1988, Alexandria, VA, pp. 289-247.

4. Russell, J.S. and Skibniewski, M.J.: “Knowledge Engineering in a Knowledge-Based System for Contractor Prequalification,” Proceedings of Microcomputer Knowledge-Based Expert Systems in Civil Engineering, American Society of Civil Engineers National Convention, May, 1988 Nashville, TN, pp. 169-185.

5. Skibniewski, M.J. and Russell, J.S.: “An Ergonomic Analysis Framework for Construction Robot Performance Requirements,” Proceedings of Fifth International Symposium on Robotics in Construction, sponsored by Japan Industrial Robot Association, June 3-06, 1988, Tokyo, Japan, pp. 531-540.

6. Russell, J.S., Skibniewski, M.J., Killen, T.S. and Robinson, J.H.: “Evaluating Alternatives in Construction Management,” Proceedings of Constructed Project Excellence, J. Bard editor, American Society of Civil Engineering, Construction Congress I, March 5-8, 1989, San Francisco, California, pp. 340-348.

7. Skibniewski, M.J., Vanegas, J.A., and Russell, J.S.: “Construction Robotic Equipment Management System (CREMS),” Proceedings of Sixth International Symposium on Automation and Robotics in Construction, sponsored by the Construction Industry Institute, June 6-8, 1989, San Francisco, CA, pp. 404-411.

8. Russell, J.S.: “Contractor Prequalification Data for Construction Managers, Published in CM Advisor, Construction Management Association of America, July 1989, pp. 6-7.

9. Russell, J.S.: “Research and Development in the Construction Industry,” Published in Wisconsin Chapter of the Associated General Contractors of America, Inc., October Newsletter, pp. 2-3.

10. Russell, J.S. and Ahmad, I.: “A PERT Approach to Contractor Prequalification Analysis,” Proceedings of Thirty-Fourth Annual Conference of the American Association of Cost Engineers (AACE), Boston, MA, pp. D.1.1-D.1.6.

11. Lee, T. and Russell, J.S.: “Potential Applications of GIS to Construction,” Proceedings of Countdown to the 21st Century, ASPRS/SACSM Annual Convention, March 18-23, 1990, Denver, CO, (paper distributed at conference).

12. Skibniewski, M.J., Tamaki, K., and Russell, J.S.: “Construction Robot Implementation Logistics,” Proceedings of Seventh International Symposium on Automation and Robotics in Construction, sponsored by Bristol Polytechnic Department of Trade and Industry, June 5-7, 1990, Bristol, England, pp. 543-555.

13. Russell, J.S.: “Research and Development in the Construction Industry,” Published in the Wisconsin Professional Engineer, July/August 1990, pp. 18-19.

14. Russell, J.S., Skibniewski, M.J., and Kunigahalli, R.: “Generic Framework For Evaluation Of Multiple Types Of Construction Robots,” Proceedings of Constructed Project Excellence, L. Chang editor, American Society of Civil Engineering, Construction Congress II, April 13-16, 1991, Cambridge, MA, pp. 240-246.

15. Meyer, G.W. and Russell, J.S.: “Electronic Communication Between Project Participants,” Proceedings of Constructed Project Excellence, L. Chang editor, American Society of Civil Engineering, Construction Congress II, April 13-16, 1991, Cambridge, MA, pp. 620-625.

16. Russell, J.S. and Radtke, M.W.: “Subcontractor Failure: Case Study,” Proceedings of Thirty-Fifth Annual Conference to American Association of Cost Engineers, June 1991, Seattle, WA, E.2.1-E.2.6.

17. Russell, J.S. and Casey, J.J.: “The Future Is Now For the Global Construction Market,” Construction Business Review, 3 (1) 1993, 70-74.

18. Russell, J.S. and O’Connor, J.T.: Preview to Constructability Implementation, Publication 34-2, 1993, Construction Industry Institute, University of Texas at Austin, Austin, TX (reviewed by a publication committee consisting of industry professionals).

19. Constructability Implementation Guide, Publication 34-1, 1993, Construction Industry Institute, University of Texas at Austin, Austin, TX, wrote 4 chapters contained in guide, pp. 1-277 (reviewed by a publication committee consisting of industry professionals).

The 6th best-selling document since 1992 for the Construction Industry Institute. CII has over 250 publications. Has led to an increase in the implementation of constructability.

20. Kunigahalli, R., Russell, J.S., and Skibniewski, M.J.: “Motion Planning For Automated Construction,” Proceedings of Tenth International Symposium on Automation and Robotics in Construction, Sponsored by Construction Industry Institute, May 23-26, 1993, Houston, TX, pp. 407-414.

Selected as one of the best papers presented at the Symposium. A total of 71 papers were published in the conference proceedings. Eleven were selected as the best papers from the conference.

21. Abou-Zeid, A. and Russell, J.S.: “Using Data Flow Diagrams to Study Communication Process Between Construction Project Participants,” Proceedings of Fifth International Conference on Computing in Civil Engineering, Sponsored by ASCE, June 7-9, 1993, Anaheim, CA, pp. 245-254.

22. Jeljeli, M.N. and Russell, J.S.: “Surety Bonds for Hazardous and Toxic Waste Construction: Opportunities and Risks,” Construction Business Review, 3 (4) 1993, pp. 72-75.

23. Kunigahalli, R. and Russell, J.S.: “Towards CAD/CAC: Integrated Computer-Aided Design and Construction,” Proceedings of Third International Conference on Fossil Plant Construction, sponsored by Electrical Power Research Institute, October 26-28, 1993, Palm Beach, FL.

24. Kunigahalli, R. and Russell, J.S.: “Visibility Graph Approach to Detached Path Planning in CNC Concrete Placement,” Proceedings of Eleventh International Symposium on Automation and Robotics in Construction, Sponsored by Construction Robotics Unit, Structures Research Center, May 24-26, 1994, Brighton, England, pp. 141-147.

25. Kunigahalli, R. and Russell, J.S.: “An Automated Process Planning System for Concrete Construction,” Proceedings of Eleventh International Symposium on Automation and Robotics in Construction, Sponsored by Construction Robotics Unit, Structures Research Center, May 24-26, 1994, Brighton, England, pp. 117-123.

26. Nebel, R.A. and Russell, J.S.: “Case Study of Navy Pier Pile Foundation Installation,” Proceedings of International Marinas, Parks, and Recreation Developments Conference, June 26-30, 1994, Milwaukee, WI, pp. 311-320.

27. Kunigahalli, R. and Russell, J.S.: “Software Technology for Design and Construction of Reinforced Concrete Structures,” Construction Business Review, 4(5), 58-61.

28. Kunigahalli, R., Russell, J.S., and Skibniewski, M. J.: “Construction Automation and Intelligent Vehicle Highway Systems: Common Thrust Areas,” Proceedings of Twelfth International Symposium on Automation and Robotics in Construction, Sponsored by Building Mechanization and Mineral Mining Research Institute, May 30, June 1 1995, Warsaw Poland, pp. 71-76.

29. Tserng, H. P., Kunigahalli, R., and Russell, J. S.: “OPSALC: An Operations Planning System for Autonomous Landfill Compaction,” Proceedings of Twelfth International Symposium on Automation and Robotics in Construction, Sponsored by Building Mechanization and Mineral Mining Research Institute, May 30, June 1 1995, Warsaw Poland, pp. 63-69.

Selected as the best technical paper of the conference out of 71 papers from 16 countries.

30. Kunigahalli, R. and Russell, J. S.: “Traffic Congestion Characterization from Supervised Learning,” Proceedings of Sixth International Conference on Computing in Civil and Building Engineering, Sponsored by Construction Robotics Unit, Structures Research Center, June 12-15, 1995, Berlin Germany.

31. Jaselskis, E.J., Anderson, S.D., and Russell, J.S., “Strategies for Improving Construction Company Safety Performance,” Proceedings of Sponsored by CBI Committee W78, February 14-16, 1996, Melbourne, Australia, pp. 160-180.

32. Tserng. H.P., Russell, J.S., Veeramani, D., and Kunigahalli, R.: “A Motion Planning Software System for Automated Landfill Compaction on Rough Surfaces,” Proceedings of Thirteenth International Symposium on Automation and Robotics in Construction Sponsored by the Japan Robot Association, May 30, June 1, 1996, Tokyo, Japan, pp. 405-413.

Selected as one of the best papers presented at the 14th International Symposium on Automation and Robotics in Construction held in Japan. A total of 70 papers were published in the conference proceedings. Ten were selected as the best papers from the conference.

33. Tserng, H.P., Russell, J.S., Krishnamurthy, B., and Schmitt, R.: “An Operations Planning System for Asphalt Pavement Compaction,” Proceedings of Thirteenth International Symposium on Automation and Robotics in Construction Sponsored by the Japan Robot Association, May 30, June 1, 1996, Tokyo, Japan, pp. 349-358.

34. Russell, J.S.: “The Idea of Building: Thought and Action in the Design and Protection of Buildings by Steven Groak,” ASCE Journal of Management in Engineering, Vol. 12, No. 4, July/August 1996, pp. 15-17.

35. Rodriguez, Y.A., Jaselskis, E.J., and Russell, J.S.: “Relationship Between Project Performance and Accidents,” Proceedings of Implementation of Safety and Health on Construction Sites, Sponsored by CBI committee X-X, September 1996, Lisbon, Portugal.

36. Russell, J.S. and Jaselskis, E.J.: Continuous Assessment of Project Performance, Construction Industry Institute, University of Texas, Austin, Special Publication, 1996.

37. Russell, J.S. and Yao, J.T.P.: “Engineering Management: What Students Need to Know,” ASCE Journal of Management in Engineering, Vol. 12, No. 6, Nov./Dec. 1996, pp. 17-24.

38. Russell, J.S.: “We Need Your Input: Evaluating a Year of JME,” ASCE Journal of Management in Engineering, Vol. 13, No. 2, March/April 1997, pg. 3.

39. Veeramani, D., Tserng, H.P., and Russell, J.S.: “Computer-Integrated Collaborative Design and Operation in the Construction Industry: A Case of Deja Vu?” published in Team CAD Workshop on Collaborative Design, May 12-13, 1997, Georgia Tech., Atlanta, GA.

40. Russell, J.S. and Meier, J.R., “Mobilizing the Organization: Bringing Strategy to Life by George Litwin, John Bray, Kathleen Lusk Brook,” ASCE Journal of Management in Engineering, Vol. 13, No. 3, May/June 1997, pg. 16.

41. Tserng, H.P., Russell, J.S., and Veeramani, D.: “The Development of 3-D Graphical Database System for Landfill Operations Using GPS,” Proceedings of Fourteenth International Symposium on Automation and Robotics in Construction, June 8-11, 1997, Pittsburgh, PA, pp. 502-510.

42. Lee, H., Schmitt, R.L., Tserng, H.P., Russell, J.S., Bahia, H.U. and Hanna, A.S.: “Real-Time Improving Productivity for Asphalt Pavement Operations Using GPS,” Proceedings of Fourteenth International Symposium on Automation and Robotics in Construction, June 8-11, 1997, Pittsburgh, PA, pp. 423-431.

43. Tserng, H.P., Ran, R., Russell, J.S., and Uicker, J.J.: “Interactive Path Planning for Construction Equipment,” Proceedings of Fourteenth International Symposium on Automation and Robotics in Construction, June 8-11, 1997, Pittsburgh, PA, pp. 388-397.

44. Russell, J.S., Western, J.L., Adams, R.E., Lindberg, H.A., and McComb, D.E.: “Changing the Face of Research – Partnering with Industry and Academic at WisDOT,” TR News, Transportation Research Board, National Research Council, No. 191, July/Aug., 1997, pp. 10-13.

45. Tserng, H.P. and Russell, J.S.: “An Instantaneous Motion Planning and Controlling Tool (Impact) for Construction Equipment,” Proceedings of ASCE Construction Congress V, Minneapolis, MN, October 5-8, 1997, pp. 1020-1029.

46. Russell, J.S., Flack, D.A., Bates, D., Hayden, W.M., and Walesh, S.W.: “A Case for an Institute of Technology and Management: A New Age of Cooperation?” ASCE Journal of Management in Engineering, Vol. 14, No. 1, Jan./Feb. 1998, pp. 26-28.

47. Lee, H., Schmitt, R.L., Tserng, H., Russell, J.S., Bahia, H.U. and Bosscher, P.J.: “Automated Hot Mix Asphalt Construction System by Integrating Productivity and Material Quality,” Proceedings of Fifteenth Annual International Symposium on Automation and Robotics in Construction, 1998, Munich, Germany, pp. 163-172.

48. Dettinger, K.M., Doh, R.H., Reindl, D.T., Bollinger, J.G., Russell, J.S., and Farrell, P.V.: “Creating A Sustainable Learning Environment,” Proceedings of American Society of Engineering Educators (ASEE), Seattle, WA, June 28-30, 1998.

49. Russell, J. and Stouffer, B.: “Building International Construction Alliances: Successful Partnering for Construction Firms by Roberto Pietroforte,” ASCE Journal of Management in Engineering, Vol. 14, No. 4, July/August 1998, pp. 19-20.

50. Russell, J.S. and Flack, D.A.: “Seminar Review: Applying Technology in Project Management and Product Design,” ASCE Journal of Management in Engineering, Vol. 14, No. 5, 1998, pp. 35-37.

51. Russell, J.S., Jaselskis, E.J., Anderson, S.A., and Hendrickson, M.L.: “A Summary of Construction Congress V,” ASCE Journal of Management in Engineering, Vol. 14, No. 6, 1998, pp. 27-30.

52. Russell, J.S., Hanna, A.S., Anderson, S.D., Wiseley, P.W., and Smith, R.J.: “The Warranty Alternative,” ASCE Civil Engr. Magazine, Vol. 69, No. 5, May 1999, p.60.

53. Lee, H.J., Schmitt, R.L., Tserng, H.P., Russell, J.S., and Bahia, H.U.: “Automated Quality Control of Hot-Mix Asphalt Construction Operation,” Proceedings of Sixteenth International Association for Automation and Robotics in Construction, ISARC ‘99, Sept. 22-24, 1999, Madrid, Spain.

54. Russell J.S.: “Servant-Leadership: Enhancing Employee’s Lives and the Bottom Line,” ASCE Journal of Management in Engineering, Vol. 15, No. 5, September/October 1999, pg. 3.

55. Russell, J.S., Stouffer, B., and Walesh, S.G.: “The First Professional Degree and the Advance of CE,” ASCE Convention and Exposition, October 18-21, 1999, Charlotte, NC.

56. Russell, J.S., Moua. B., and Meier, J.R.: “State-of-Practice in Maintainability: Seven Core Studies,” Res. Rep. 142-12, Construction Industry Institute, University of Texas at Austin, Austin, TX, 1999.

57. Russell, J.S.: “The Significance and Value of Labor,” ASCE Journal of Management in Engineering, Vol. 15, No. 6, November/December 1999, pp. 3-4.

58. Lewis, B., Russell, J., Avila, C., Benton, S., Hayden, W., Haransky, S., Farr, J., and Hobbs, J.: “Forum,” ASCE Journal of Management in Engineering, Vol. 15, No. 6, November/December 1999, pp. 5-23.

59. Russell, J.S.: “Trends in our industry,” ASCE Journal of Management in Engineering, Vol. 16, No. 1, January/February 2000, p. 3.

60. Russell, J.S.: “Editor’s Letter: Change is Coming: A Customer – Driven Publication That Ads Value,” ASCE Journal of Management in Engineering, Vol. 16, No. 2, 2000, p. 3.

61. Russell, J.S.: “Editor’s Letter: How About Coaching for Improved Performance,” ASCE Journal of Management in Engineering, Vol. 16, No. 3, 2000, p. 3.

62. Russell, J.S.: “Editor’s Letter: The Global Economy,” ASCE Journal of Management in Engineering,” Vol. 16, No. 6, 2000, p. 3.

63. Schmitt, R.L., Hanna, A.W., Russell, J.S., and Nordheim, E.V.: “Contractor Quality Control Testing Levels for Highway Construction,” Proceedings of ASCE Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World, Edited by Kenneth D. Walsh, Orlando, FL, February 20-22, 2000.

64. Jung, G.A., Russell, J.S., Schmitt, R.L., and Hanna, A.S.: “Inspection Tasks for Hot Mix Asphalt Overlays,” Proceedings of ASCE Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World, Edited by Kenneth D. Walsh, Orlando, FL, February 20-22, 2000.

65. Hanna, A.S., Peterson, P., Dettwiler, J., Russell, J.S., and Gunduz, M.: “Assessment of Global Impact of Change Orders on Construction: Approach,” Proceedings for ASCE Construction Congress VI: Building Together for an Increasingly Complex World, Edited by Kenneth D. Walsh, Orlando, FL, February 20-22, 2000.

66. Russell, J.S.: “Change is Coming: A customer-Driven Publication That Adds Value,” ASCE Journal of Management in Engineering, Vol. 16, No. 2, March/April 2000, pg. 3.

67. Kim, S.K. and Russell, J.S.: “Framework for an Intelligent Field Operation System IFOS: Part 1 – System Architecture,” Proceedings of Automation and Robotics in Construction, pp. 1-7.

68. Kim, S.K. and Russell, J.S.: “Framework for an Intelligent Field Operation System IFOS: Part 2 – Task Identification and Planning Methodology,” Proceedings of Automation and Robotics in Construction, pp. 8-14.

69. Russell, J.S., Stouffer, B., and Walesh, S.G.: “Business Case for the Master’s Degree: The Financial Side of the Equation,” ASCE Education Conference, October, Houston, TX, pp. 49-59.

70. Koo, K.J. and Russell, J.S.: “Program Management Model for Multiple Building Maintenance Projects,” Proceedings of the 8th International Conference on Computing in Civil and Building Engineering (VIII-ICCCBE), (ed.) R. Fruchter Et al., Stanford, CA, ASCE, 2000, pp. 1220-1227.

71. Kim, S.K., Koo, K.J., and Russell, J.S.: “Agent-Based Approach for Intelligent Automated Landfill Operation System,” Proceedings of the 17th IAARC/CIB/IEEE/IFAC/IFR International Symposium on Automation and Robotics in Construction, (ed.) M.T. Wang et al., Taipei, Taiwan, IAARC/CIB/IEEE/IFAC/IFR, September 18-20, 2000, pp. 91-95.

72. Lewis, B., Russell, V., Russell, J., Benton, S., and Hayden, B.: “Forum,” ASCE Journal of Management in Engineering, Vol. 16, No. 5, September/October 2000, pp. 4-9.

73. Russell, J.S.: “Welcome to LME,” Leadership and Management in Engineering, Vol. 1, No. 1, 2001, p. 3.

74. Russell, J.S.: “Are You Managing Perceptions?” Leadership and Management in Engineering, Vol. 1, No. 2, 2001, p. 2.

75. Russell, J.S.: “Journal Editors Recognized (1tr.),” ASCE News, Vol. 26. No. 2, February 2001, pg. 10.

76. Russell, J.S.: “Standing on the Shoulders of Our Forefathers,” Leadership and Management in Engineering, Vol. 1, No. 3, 2001, p. 1.

77. Russell, J.S., and Schumacher, K. T.: “Beyond Race and Gender: Unleashing the Power of Your Total Work Force by Managing Diversity,” Leadership and Management in Engineering, Vol. 1, No. 3, 2001, p. 16.

78. Russell, J.S.: “Strength in Diversity,” Leadership and Management in Engineering, Vol. 1, No. 4, 2001, pp. 3-4.

79. Dieter, D.A., Bank, L.C., Dietsche, J.S., Oliva, M.G., and Russell, J.S.: “Concrete Bridge Decks Constructed with FRP Stay-in-Place Forms and FRP Grid Reinforcing,” Proceedings of the 5th NSF National Workshop on Bridge Research in Progress, Minneapolis, MN, October 8-10, 2001, pp. 85-90.

80. Bank, L.C., Gentry, T.R., Thompson, B.P., and Russell, J.S.: “A Model Specification for FRP Composites for Civil Engineering Structures in FRP Composites in Civil Engineering,” Proceedings of the International Conference on FRP Composites in Civil Engineering, Hong Kong, December 12-15, 2001, pp. 3-14.

81. Russell, J.S.: “Are You Measuring Your True Worth?,” Leadership and Management in Engineering, Vol. 2, No. 2, 2002, p. 2.

82. Dieter, D. A., Dietsche, J.S., Bank, L.C., Oliva, M.G., and Russell, J.S.: “Concrete Bridge Decks Constructed with FRP Stay-in-Place Forms and FRP Grid Reinforcing,” Proceedings of the 81st Annual Transportation Research Board Meeting, CD-ROM, Washington, D.C., January 2002.

83. Bank, L.C., Gentry, T.R., Thompson, B.P., and Russell, J.S.: “A Model Specification for Composites for Civil Engineering Structures,” Proceedings of the 81st Annual Transportation Research Board Meeting, CD-ROM, Washington, D.C., January 2002.

84. Russell, J.S.: “Unfinished Work: Learning from the Past for the Future,” Leadership and Management in Engineering, Vol. 2, No. 4, October 2002, p. 4.

85. Jang, H.S. and Russell, J.S.: “Current Level of Satisfaction with Construction Material Logistics Tasks,” First International Conference on Construction in the 21st Century, Miami, FL, April 25-26, 2002, pp. 443-450.

86. Kim, Sung-Keun and Russell, J.S.: “An Agent-Based System for Intelligent Field Operations,” Proceedings of the 9th International Conference on Computing in Civil and Building Engineering, Taipei, Taiwan, April 3-5, 2002, pp.1275-1280.

87. Park, Hyung-Keun and Russell, J.S.: “Cash Flow Forecasting Model using Moving Weights of Cost Categories for General Contractors on Jobsite,” Proceedings of the 1st International Conference on Construction in the 21st Century, Miami, FL, April 25-26, 2002, pp.49-56.

88. Her, B.M. and Russell, J.S.: “Maintainability Implemented by Third-Party Contractor for Public Owner,” ASCE Journal of Management in Engineering, Vol. 18, No. 2. April 2002, pp. 95-102.

89. Gentry, T.R., Bank, L.C., Thompson, B.O., and Russell, J.S.: “An Accelerated Test Based Specification for Fiber Reinforced Plastics for Structural Systems,” Proceedings of CDCC 2002, 2nd International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Montreal, CANADA, May 29-31, pp. 13-24.

90. Helmueller, E.J., Bank, L.C., Dieter, D.A., Dietsche, J.S., Oliva, M.G., and Russell, J,S.: “The Effect of Freeze-Thaw on Bond between FRP Stay-in-Place Deck Forms and Concrete,” Proceedings of CDCC 2002, 2nd International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Montreal, CANADA, May 29-31, pp. 141-152.

91. Russell, J.S.: “Bail Out Concrete Canoe Race,” Engineering News Record, June 2002, p. 71.

92. Russell, J.S. and Stouffer, W.B.: “Why Raise the Education Bar for Civil Engineers,” Proceedings of the 2002 American Society of Engineering Education Annual Conference & Exposition, Montréal, Quebec, Canada, June 2002.

93. Dietsche,J.S., Dieter,D.A., Bank,L.C., Oliva,M.G., and Russell,J.S.: “Material Characterization of a Glass FRP Composite Structural Element,” Proceedings of the 2002 SEM Conference, Milwaukee, WI, June 10-12, 2002, CD-ROM.

94. Lee, M.J., Hanna, A.S., and Russell, J.S.: “Benchmarking Productivity for Electrical Projects,” Proceedings of 2002 AACE International Transactions, Portland, OR: AACE International, 2002.

95. Russell, J.S. and Stouffer, B.: “Leadership: Is It Time for an Educational Change?,” Leadership and Management in Engineering, Vol. 3, No. 1, January 2003, pp. 2-3.

96. Russell, J., Walesh, S., Anderson, R., Buehring, M., DeSoto-Duncan, A., Durrant, J., Esslinger, J, Galloway, G., Kellogg, C., LeFevre, E., Lenox, T., Morgan, D., Musselman, C., Price, B., and Smerdon, E.: “We are Listening: A Progress Report on Policy Statement 465 (ltr),” Civil Engineering, ASCE, Vol. 73, No. 1, January 2003, pp. 10-11.

97. Russell, J.S. and Stouffer, W.B.: “CEM Faculty: A Leading Opportunity for the Civil Engineering Profession,” Proceedings of Construction Research Congress: Winds of Change: Integration and Innovation In Construction, ASCE Construction Congress VII, Honolulu, HI, March 19-21, 2003.

98. Russell, J.S.: “Thank You For the Opportunity to Serve as Editor,” Leadership and Management in Engineering, Vol. 3, No. 2, 2003, p. 65.

99. Choi, J., Russell, J.S., and Miller, R.B.: “Forecasting Performance Evaluation: Does a Complicated Model Outweigh a Simple One?,” Proceedings of Construction Research Congress: Winds of Change: Integration and Innovation In Construction, ASCE Construction Congress VII, Honolulu, HI, March 19-21, 2003, pp. 95-102.

100. Russell, J.S. and Stouffer, W. B.: “CEM Faculty: A Leading Opportunity for the Civil Engineering Profession,” Proceedings of Construction Research Congress: Winds of Change: Integration and Innovation In Construction, ASCE Construction Congress VII, Honolulu, HI, March 19-21, 2003, pp. 611-618.

101. Jang, H., Kim, S., and Russell, J.S.: “Manage Space for Construction Facilities on High-Rise Buildings,” Proceedings of Construction Research Congress: Winds of Change: Integration and Innovation In Construction, ASCE Construction Congress VII, Honolulu, HI, March 19-21, 2003, pp. 925-932.

102. Russell, J.S., et al.: “ASCE’s Raise the Bar Initiative: Master Plan for Implementation,” Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition, Nashville, TN, June 25, 2003.

103. Smerdon, E.T., Anderson, R.O., and Russell, J.S.: “ASCE’s Raise the Bar Initiative: Accreditation-Related Barriers and Critical Issues,” Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition Staying in Tune with Engineering Education, Nashville, TN, June 22-25, 2003. pp. 5145-5152

104. Stouffer, W.B. and Russell, J.S.: “Too Liberal or Not Liberal Enough: Liberal Arts, Electives, and Professional Skills,” Proceedings of the 2003 American Society for Engineering Education Annual Conference & Exposition Staying in Tune with Engineering Education, Nashville, TN, June 22-25, 2003. pp. 9649-9662.

105. Bank, L.C., Oliva, M.G., Russell, J.S., Dieter, D.A., Dietsche, J.S., Hill, R.A., Gallagher, B., Carter, J.W., Woods, S., and Anderson, G.H.: “Details and Specifications for a Bridge Deck with FRP Formwork, Grid and Rebar,” Proceedings of FRPRCS-6 (ed. K.W. Tan), Singapore, July 8-10 2003, pp. 1301-1310.

106. Russell, J., Walesh, S., Anderson, R., Buehring, M., DeSoto-Duncan, A., Durrant, J., Esslinger, J, Galloway, G., Kellogg, C., LeFevre, E., Lenox, T., Morgan, D., Musselman, C., Price, B., and Smerdon, E.: “A Progress Report on Policy Statement 465 (Letter),” Civil Engineering, ASCE, Vol. 73, No. 9, September 2003, pg. 8.

107. Stouffer, W.B. and Russell, J.S.: “Making the Strange Familiar: Creativity and the Future of Engineering Education,” Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, Salt Lake City, UT, June 22, 2004.

108. Russell, J.S.: “Choosing to Cheat,” Leadership and Management in Engineering, Vol. 4, No. 1, 2004.

109. Berg, A.C., Bank, L.C., Oliva, M.G., and Russell, J.S.: “Construction of a FRP Reinforced Bridge Deck on US Highway 151 in Wisconsin, “Proceedings of the 83rd Annual Transportation Research Board Meeting, CD-ROM, Washington, DC, January 11-14, 2004.

110. Jacobson, D.A., Bank, L.C., Oliva, M.G., and Russell, J.S.: “Punching Shear in Fiber-Reinforced Polymer (FRP) Bi-layer Grid-Reinforced Concrete Bridge Decks,” Proceedings of the 83rd Annual Transportation Research Board Meeting, CD-ROM, Washington DC, January 11-14, 2004.

111. Russell, J.S. and, Stouffer, W.B., and Walesh, S.W.: “Changing Civil Engineering Education: A Systems View,” 2004 ASCE Specialty Conference on Leadership and Management in Construction, March 25-26, 2004, Hilton Head, SC.

112. Bank, L.C., Oliva, M.G., Russell, J.S., Jacobson, D., Conachen, M., Nelson, B., and McMoningal, D.: “Super-Sized Double-Layer Pultruded Gratings,” Proceedings of COMPOSITES 2004 Convention and Trade Show, American Composites Manufactures Association, CD-ROM, October 6-8, 2004, Tampa, FL.

113. Menches, C.L., , Hanna, A.S., and Russell, J.S., “Benchmarking Effective Pre-Construction Planning.,” Proceedings of Building Future Council: The Future of the AEC Industry, The BFC, Alexandria, VA, March 2005, pp. 1-10.

114. Menches, C.L.,Hanna, A.S.,and Russell, J.S.: “Effect of Pre-Construction Planning on Project Outcomes,” Proceedings of Construction Research Congress 2005, Broadening Perspectives, San Diego, CA, Vol.183, No.76, April 5-7, 2005, pp. 777-786.

115. Oliva, M.G., Bank, L.C., Russell, J.S., Conachen, M. and Ehmke, F.: “Reinforcing Concrete Bridge Decks with Prefabricated FRP Grids and Stay-in-Place Formwork,” Proceedings of International Workshop on Innovative Bridge Deck Technologies, ISIS, Ed. N. Banthia & A. Mufti, Winnipeg, CAN, April 14-15, 2005, pp. 113-126.

116. Russell, J.S., Walesh, Stuart G., “ASCE’S body knowledge: Preparing for the future,” Proceedings of 2005 ASEE Annual Conference and Exposition: The Changing Landscape of Engineering and Technology Education in a Global World, Portland, Oregon, June 12-15, 2005, pp. 737-743.

117. Russell, J.S., Smerdon, E. T., and Lenox, T. A.: “It’s time to remove a barrier to engineering education reform: ABET’s Prohibition and dual level accreditation,” Proceedings of 2005 ASEE Annual Conference and Exposition: The Changing Landscape of Engineering and Technology Education in a Global World, Portland, Oregon, June 12-15, 2005, pp. 5193-5202.

118. Bosscher, P. J., Russell, J. S., and Stouffer, W. B.: “The Sustainable Classroom: Teaching sustainability to tomorrow’s engineers,” Proceedings of 2005 ASEE Annual Conference and Exposition: The Changing Landscape of Engineering and Technology Education in a Global World, Portland, Oregon, June 12-15, 2005, pp. 13643-13650.

119. Bank, L., Oliva, M., Russell, J., Conachen, M., Ringelstetter, T. and Jacobson, D.: “Concrete Bridge Decks Reinforced with Prefabricated Super-sized 3-D Pultruded FRP Grids,” 2005 Western Bridge Engineer’s Seminar, Portland, Oregon, September 26-28, 2005.

120. Markowski, S., Ehmke, F., Bank, L.C., Oliva, M.G., Russell, J.S., Carter, J.W., and Woods, S.: “Full-depth, Precast, Prestressed Bridge Deck Panel System for Bridge Deck Construction in Wisconsin,” Proceedings of 2005 PCI-FHWA National Bridge Conference, CD-ROM, Palm Springs, CA, October 16-19, 2005.

121. Jacobson, D.A., Bank, L.C., Oliva, M.G., and Russell, J.S.: “Punching Shear Capacity of Double Layer FRP Grid Reinforced Slabs,” Proceedings of 7th International Symposium on Fiber Reinforced Polymer for Concrete Structures FRPRCS7, SP-230, American Concrete Institute, New Orleans, Louisiana, November 7-10, 2005, pp. 857-876.

122. Ehmke, F., Markowski, S., Oliva, M., Carter, J.W., Bank, L., Russell, J., Woods, S., Becker, R.: “Rapid Staged Construction with Full Depth Precast Deck Panels,” Proceedings of 2005 FHWA Accelerated Bridge Construction Conference, San Diego, CA, December 15-16, 2005.

123. Matti, F., Nanni, A., Galeti, N., Ringelstetter, T.E., Bank, L.C., Oliva, M.G., Russell, J.S., Orr, B.M., Jones, S.N.: “Prefabrication Modular GFRP Reinforcement for Accelerated Construction of Bridge Deck and Rail System,” Proceedings of 2005 FHWA Accelerated Bridge Construction Conference, San Diego, CA, December 15-16, 2005.

124. Oliva, M., Bank, L., Russell, J., Markowski, G., Ehmke, R., Becker, J.W., and Carter III, : “Rapid Staged Construction with Precast Full Depth Panels,” Proceedings of 2005 FHWA Accelerated Bridge Construction Conference, San Diego, CA, December 15-16, 2005.

125. Russell, J.S. and Lenox, T.A.: “ASCE’s Raise the Bar Effort: Forward Progress.” Proceedings of 2nd Specialty Conference on Leadership and Management in Construction, Grand Bahama Island, Bahamas, May 4-6, 2006, pp. 2-8.

126. Russell, J.S. and Galloway, G.E.: “ASCE’s Raise the Bar Effort: Fulfillment and Validation of the Attainment of the Civil Engineering Body of Knowledge.” Proceedings of 2nd Specialty Conference on Leadership and Management in Construction, Grand Bahama Island, Bahamas, May 4-6, 2006, pp. 158-166.

127. Russell, J.S., Lenox, T.A, Walesh S.G., Anderson, R.O., Galloway, G.E., Musselman, C.N., Bergstrom, W.R., Nelson, J.K., and O’Brien, J.J.: “Progress on Raising the Bar – Current Progress and Anticipated Next Steps.” Proceedings of 2006 ASEE Annual Conference & Exposition, CD-ROM, Chicago, IL, June 18-21, 2006.

128. Martin. J, Farrell, P., Graham, M., Peercy, P., Pfatteicher, S.A., Russell, J., and Wendt, A.: “(Re)Designing the College of Engineering at the University of Wisconsin-Madison for 2010 and Beyond.” Proceedings of 2006 ASEE Annual Conference & Exposition, CD-ROM, Chicago, IL, June 18-21, 2006.

129. Russell, J.S.: “Evolution of the Engineering Profession… toward a future of meaning and value.” Proceedings of 2006 ASEE Annual Meeting: Learning from Each Other: Findings from CASEE Affiliates, San Diego, CA, October 27, 2006.

130. Russell, J.S.: “Why the engineering profession must reinvent itself for the modern world.” The magazine for Professional Engineers, NSPE, December, 2006, pp. 29-33.

131. Russell, J.S., et al.: “The Means for Realizing the Aspirational Visions of Civil Engineering in 2025.” Proceedings of 2007 ASEE Annual Conference & Exposition, CD-ROM, Honolulu, Hawaii, June 24-27, 2007.

132. Hanus, J.P. and Russell, J.S.: “Integrating Teamwork, Diversity, Leadership, and Communication Skill Development into a Capstone Design Course.” Proceedings of 2007 ASEE Annual Conference & Exposition, CD-ROM, Honolulu, HI, June 24-27, 2007.

133. Smerdon, E.T. and Russell, J.S.: “Two Comprehensive U.S. Studies of Engineering Education Reform.” Proceedings of International Conference on Engineering Education – ICEE 2007, Coimbra, Portugal, September 3-7, 2007.

134. Russell, J. S.: “Engineering Professional Growth and Quality and Cultivating the Next Generation,” Leadership and Management in Engineering, ASCE, Vol. 8, No. 2, April 2008, pp. 57-60.

135. Hanus, J.P., Hamilton, S. and Russell, J.S.: “The Cognitive and Affective Domain in Assessing Life-Long Learning in a Program’s Mission to Inspire and to Achieve the ASCE’s Body of Knowledge Outcome.” Proceedings of 2008 ASEE Annual Conference & Exposition: Building Bridges to Create Change in Engineering Education, Pittsburgh, PA, June 22–25, 2008.

136. Russell, J.S., Galloway, G.E., Lenox, T.A. and O’Brien, J.J.: “ASCE Policy 465 – Progress and Next Steps.” Proceedings of 2008 ASEE Annual Conference & Exposition: Building Bridges to Create Change in Engineering Education, Pittsburgh, PA, June 22–25, 2008.

137. Wayne, P.P., Russell, J.S., and Nelson, J.S.: “Project Management for Experienced Professionals: Collaborative, Applied Learning for Distributed Teams.” Proceedings of 2008 ASEE Annual Conference & Exposition: Building Bridges to Create Change in Engineering Education, Pittsburgh, PA, June 22–25, 2008.

138. Nelson, J.S., Hanna, A.S. and Russell, J.S.: “Leadership in the Global Construction Industry: The Challenge of the Brutal Facts.” Proceedings of 2008 Specialty Conference Leadership and Management in Construction, Stanford Sierra Conference Center, South Lake Tahoe, CA, October 16-19, 2008.

139. Bank, L.C., Malla, M.G., Oliva, M.G., Russell, J.S., Bentur, A., and Shapira, A.: “A Specification for thin FRP/FRC Forms for Bridge Deck Construction.” Fourth International Conference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, July 22-24, 2008.

140. Chin, C.-S. and Russell, J.S.: “Identifying Significant Factors Affecting Request For Information (RFI) Process Time.” Proceedings of Winter Simulation Conference 2008 (WSC08), Miami, FL, December 7-10, 2008

141. Chin, C.-S. and Russell, J.S.. “Improving Performance of Process Flows.” Proceedings of the 16th Annual Conference of the International Group for Lean Construction (IGLC 16), Manchester, UK, July 16-18, 2008.

142. Chin, C.-S. and Russell, J.S. (2008). “Predicting the expected service level and the realistic lead time of RFI process using binary logistic regression.” Proceedings of the 24th Annual ARCOM (Association of Researchers in Construction Management) Conference, Cardiff, UK, September 1-3, 2008.

143. Azarin, S., Ferrier, N., Kennedy, S. M., Klingenberg, D., Masters, K., McMahon, K. D., Russell, J., and Hagness, S. C. “Work in Progress-A First-Year Introduction-to-Engineering Course on Society’s Engineering Grand Challenges.” 38th ASEE/Frontier in Education Conference F1D-1, Saratoga Springs, NY, October 22-25, 2008.

144. El-Asmar, M., Hanna, A. S., Chang, C., Russell, J.S.: “Alliance Team Selection for Insfrastructure Projects Using Monte Carlo Simulation,” Building a Sustainable Future, Construction Research Congress, Seattle, WA, April 4-7, 2009.

145. Ressler, S., and Russell, J.S.: “The Sociology of Professions: Application to Civil Engineering.” Proceedings of 2009 ASEE Annual Conference & Exposition, Austin, TX, June 14-17, 2009.

146. Russell, J.S., Galloway, G., Lenox, T., and O’Brien, J.: “ASCE Policy 465 – Progress and Next Steps.” Proceedings of 2009 ASEE Annual Conference & Exposition, Austin, TX, June 14-17, 2009.

147. Thompson, B.P., Bank, L.C., Bier, V.M., and Russell, J.S.: “Use of System Dynamics for the Integration of Decision-Making for Security and Sustainability in Building Design.” The Energy, Environment, and Security Summit, Garmisch, Germany, July 2009.

148. Russell, J.S., Doran, M., Quagliana, C., Hassett, R., and Harrington, G.: “University of Wisconsin-Madison Civil & Environmental Engineering Capstone Design Class – A Class in Constant Redesign and Improvement.” Proceedings of 2010 ASEE Annual Conference & Exposition, Louisville, Kentucky, June 20-23, 2010

149. Doran, M., Russell, J.S., Quagliana, C., Doll, N, and Harrington, G.: “Strengthening the Body of Knowledge – How Integration of Practicing Engineers as Adjunct Faculty can Provide Better Educational Outcomes.” Proceedings of 2010 ASEE Annual Conference & Exposition, Louisville, KY, June 20-23, 2010

150. Cramer, S.M., Crone, W., Lafayette, M., Russell, J.S., Klingenberg, D., Peercy, P., Thelen, D., Wendt, A.: “A Case Study on Transforming Undergraduate Engineering Education at the University of Wisconsin-Madison.” Proceedings of 2010 ASEE Annual Conference & Exposition, Louisville, KY, June 20-23, 2010

151. Leonard, B., Ressler, S.J., Russell, J.S.: “Do We Need to Raise the Bar for Future Professional Engineers?” Distinguished Lecture Series, Proceedings of 2012 ASEE Annual Conference & Exposition, San Antonio, TX, June 10-13, 2012

152. Beletic, A.E., Bradford, R.D., Russell, J.S., et al. (2014) Quantitative Measurement of Project Manager Competencies, Research Summary 306-1. Construction Industry Institute.

153. Nicometo, C.G., and Russell, J.S. (2015) Filling in the Gaps: An Interdisciplinary Approach for Teaching Professional Competencies to Graduate Engineers. Proceedings of the 2015 ASEE Annual Conference & Exposition. Seattle, WA.

154. Pfatteicher, S.K.A., Kleinman, D.L., Macgregor, L., and Russell, J.S. (2015) Got ISSuES?: Promoting Reflection About Engineering and Society Among Undergraduates. Proceedings of the 2015 Research in Engineering Education Symposium. Dublin, Ireland.

155. Pferdehirt, Wayne; Nelson, John; and Russell, Jeffrey S. (2018). “Evolving the Teaching and Practice of Project Management: Lessons Learned on the Path to Living Order,” Proceedings of 2005 ASEE Annual Conference and Exposition: The Changing Landscape of Engineering and Technology Education in a Global World, Salt Lake City, UT, June 24-27, 2018.

Unpublished Technical Reports

1. Russell, J.S., Hancher, D.E., and Skibniewski, M.J.: “Knowledge Representation and Definition of Contractor Qualification Factors,” Technical Report to the U.S. Army Corps of Engineers, Construction Engineering Research Laboratory, December 1987, Champaign, IL, 83 pgs.

2. Skibniewski, M.J., Lutz, J.D., Russell, J.S., Hijazi, A., and Sako, N.: “Research on the Automation of Concrete Placement and Finishing,” Technical Report, Purdue University, School of Civil Engineering, February 1988, West Lafayette, IN, 187 pgs.

3. Russell, J.S., Skibniewski, M.J., and Hancher, D.E.: “Correlation Study Between Contractor Qualification Variables,” Technical Report to Purdue University, School of Civil Engineering, February 1989, West Lafayette, IN, 44 pgs.

4. Skibniewski, M.J., Russell, J.S., Vanegas, J.A., Posey, J. W., and Rembold, B. A.: “Construction Robotic Equipment Management System (CREMS),” Progress Report I to Ohbayashi Corp., June 1989, Tokyo, Japan, 144 pgs.

5. Skibniewski, M.J., Russell, J.S., and Cartwright, T.: “Construction Robotic Equipment Management System (CREMS),” Progress Report II to Ohbayashi Corp., March 1990, Tokyo, Japan, 81 pgs.

6. Russell, J.S. and Radtke, M.W.: “Enhancing the Communication Process Between Disadvantaged Business Enterprise Firms and Prime Contractors,” Technical Report No. 101 to the Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, July 1990, Madison, WI, 146 pgs.

7. Russell, J.S., Benson, C.H., and Jeljeli, M.N.: “Use of Monte Carlo Techniques To Enhance QUALIFIER-1 Contractor Prequalification Model,” Technical Report No. 102, Department of Civil and Environmental Engineering, July 1990, Madison, WI, 200 pgs.

8. Russell J.S. and Hollar, B.J.: “An Analysis Of The Traffic Control Planning Process,” Technical Report No. 103 to Wisconsin Road Builders, Department of Civil and Environmental Engineering, August 1990, Madison, WI, 41 pgs.

9. Russell J.S.: “Compilation of Surety Industry Perceptions on Availability of Reclamation Bonds For Small to Medium Size Mining Operators,” Technical Report No. 104 to Purdue University, Department of Civil and Environmental Engineering, December 1990, Madison, WI, 130 pgs.

10. Skibniewski, M.J. and Russell, J.S.: “Evaluation and Quantification of Risks Confronted By Surety Companies Underwriting Reclamation Bonds,” Technical Report to the United States Department of Interior, Office of Surface Mining Reclamation and Enforcement, January 1991, Pittsburgh, PA, 218 pgs.

11. Russell, J.S. and Severson, G.D.: “An Analysis and Evaluation of a Plan Evaluation Form,” Technical Report No. 105 to the Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, December 1991, Madison, WI, 150 pgs.

12. Russell J.S. and Koland, B.J.: “Investigation of Premature Cracking on Selected Bridge Decks,” Technical Report No. 106 to Wisconsin Road Builders, Department of Civil and Environmental Engineering, December 1991, Madison, WI, 41 pgs.

13. Russell, J.S. and Kunigahalli, R.: “Construction Robotic Equipment Management System (CREMS),” Technical Report No. 107 to the Purdue University, Department of Civil and Environmental Engineering, December 1991, Madison, WI, 400 pgs.

14. Skibniewski, M.J., Russell J.S., and Showalter, E.: “Evaluation and Quantification of Risks Confronted by Surety Companies Underwriting Reclamation Bonds,” Summary of Phases III, Purdue University, School of Civil Engineering, December 1991, West Lafayette, IN, 30 pgs.

15. Skibniewski, M.J., Russell, J.S., et al.: “Construction Robotic Equipment Management System (CREMS),” Final Report to Ohbayashi Corp., April 1992, Tokyo, Japan, 300 pgs.

16. Russell, J.S., Radtke, M.W., and Gugel, J.G.: “Project-Level Model and Approaches to Implement Constructability” Technical Report No. 108 to Construction Industry Institute, Department of Civil and Environmental Engineering, September 1992, Madison, WI, 224 pgs.

17. Russell, J.S., Gugel, J.G., and Radtke, M.W.: “Benefits and Costs of Constructability: Four Case Studies,” Technical Report No. 109 to Construction Industry Institute, Department of Civil and Environmental Engineering, September 1992, Madison, WI, 125 pgs.

18. Skibniewski, M.J. and Russell, J.S.: “Evaluation and Quantification of Risks Confronted By Surety Companies Underwriting Reclamation Bonds,” Final Technical Report to the United States Department of Interior, Office of Surface Mining Reclamation and Enforcement, August 1992, Pittsburgh, PA, 450 pgs.

19. Gugel, J.G., Russell, J.S. and Radtke, M.W.: “Models For Constructability Approach Selection and Input-Source Evaluation,” Technical Report No. 110 to Construction Industry Institute, Department of Civil and Environmental Engineering, September 1992, Madison, WI, 342 pgs.

20. Veleke, J.K. and Russell, J.S.: “Investigation of the Impact of Environmental Regulations on the Highway Construction Industry,” Technical Report No. 111 to Wisconsin Road Builders, Department of Civil and Environmental Engineering, December 1992, Madison, WI, 70 pgs.

21. Severson, G.D. and Russell, J.S.: “Predicting Construction Contract Surety Bond Claims Using Contractor Failure Data,” Technical Report No. 113, Department of Civil and Environmental Engineering, December 1992, Madison, WI, 200 pgs.

22. Russell, J.S., Bosscher, P.J., Zhai, H., and Vadakpat, G.: “Predicting Pavement Surface Friction for Wisconsin State Truck Highway System,” Technical Report No. 114, Department of Civil and Environmental Engineering, December 1993, Madison, WI, 150 pgs.

23. Russell, J.S. and Swiggum, K.E.: “Investigation of Constructability Concepts and Tools for Highway Construction,” Technical Report No. 115 to Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, May 1994, Madison, WI, 237 pgs.

24. Russell, J.S. and Swiggum, K.E.: “Lessons Learned and Constructability Review Databases,” Technical Report No. 116 to Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, May 1994, Madison, WI, 94 pgs.

25. Russell, J.S. and O’Brien, T.O.: “Total Quality Management in Construction: A Study of the Wisconsin Facility Delivery Process-1,” Technical Report No. 117, Department of Civil and Environmental Engineering, June 1994, Madison, WI, 94 pgs.

26. Russell, J.S. and O’Brien, T.O.: “Total Quality Management in Construction: A Study of the State of Wisconsin Facility Delivery Process-2,” Technical Report No. 118, Department of Civil and Environmental Engineering, June 1994, Madison, WI, 94 pgs.

27. Russell, J.S., Hanna, A.S., and Lawrence, S.P.: “Investigation of Longitudinal Joints in PCC Pavements,” Technical Report No. 119 to Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, June 1994, Madison, WI, 200 pgs.

28. Hanna, A.S., Russell, J.S., Noyce, D.A. and Schmitt, R.L.: “Asphaltic Pavement Density Comparisons Using Coring and Nuclear Techniques,” Technical Report No. 120 to Wisconsin Department of Transportation, Department of Civil and Environmental Engineering, January 1995, Madison, WI, 200 pgs.

29. Russell, J.S., Jaselskis, E.J., Arneson, J.A., and Lawrence, S.P.: “A Framework to Organize and Classify Predictive Tools for Construction Project Managers,” Technical Report No. 121 to Construction Industry Institute, Department of Civil and Environmental Engineering, August 1995, Madison, WI, 125 pgs.

30. Russell, J.S., Jaselskis, E.J., and Lawrence, S.P.: “Predicting Successful Projects,” Technical Report No. 122 to Construction Industry Institute, Department of Civil and Environmental Engineering, August, 1995, Madison, WI, 125 pgs.

31. Bosscher, P.J., Menclova, E., Russell, J.S., and Wahl, R.E.: “Estimating Bearing Capacity of Piles Installed with Vibratory Drivers,” Construction Productivity Advancement Research (CPAR) Program Final Report CPAR-GL-98-2, U.S. Army Corps of Engineers Waterways Experiment Station, July 1998, 161 pgs.

32. Russell, J.S., Hanna, A.S., and Nordheim, E.V.: “Testing and Inspection Levels for Hot Mix Asphaltic Concrete Overlays,” Preliminary Draft Final Report to National Cooperative Highway Research Program, Department of Civil and Environmental Engineering, November 1998, Madison, WI, 250 pgs.

33. Hanna, A., and Russell, J.: “Quantifying the Cumulative Impact of Change Orders,” Joint Publication with CII, Electric 21, The Mechanical Foundation, 31 pgs.

34. Russell, J.S., Hanna, A.S., Nordheim, E.V., and Schmidt, R.L.: “Testing and Inspection Levels for Hot-Mix Asphaltic Concrete Overlays,” Transportation Research Record, NCHRP Report 447, 2001, National Cooperative Highway Research Program, 2001,128 pgs.

35. Russell, J.S., and Anderson, S.D.: “Guidelines for Warranty, Multi-Parameter and Best Value Contracting,” Transportation Research Record, NCHRP Report 451, 2001, National Cooperative Highway Research Program, 2001,101 pgs.

36. Russell, J.S., Anderson, S., and Hanna, A.: “Research Program for Construction Engineering,” National Cooperative Highway Research Program, 2001.

37. Hanna, A. S., Russell, J. S., and Emerson, E. O. “Stacking of Trades:” The Electrical Contracting Foundation, Bethesda, MD, 2002.

38. Bank, L.C., Russell, J.S., Gentry, T.R., and Thompson, B.P.: “Accelerated Test-Based Material Specifications for Fiber Reinforced Plastics for Highway Structures,” Final Report, Contract No. DTFH61-00-C-00021, FHWA, 2002.

39. Hanna, A. S., Bahia, H. U., Russell, J. S: Schoenfelder, S., Loh, S.W.: “Determining a Temperature-Density Relationship After Completed Rolling of HMA,” Wisconsin Highway Research Program, Madison, WI, 2002.

40. Hanna, A. S. and Russell, J. S.: “Quantifying the Cumulative Impact of Change Orders for Electrical Contractors,” The Electrical Contracting Foundation, Bethesda, MD, 2002.

41. Russell, J.S., Anderson, S.D., Trejo, D., and Hanna, A.S.: “Construction Engineering and Management Research Program,” Transportation Research Board, National Research Council, NCHRP Web Document 51 (Project D10-58), November 2002, 351 pgs.

Bank, L.C., Oliva, M.G., Russell, J.S., Dieter, D.A., Dietsche, J.S., Berg, A.C., Ehmke, F.G., Carter, J., Henke, R.., Hill, R., and Gallagher, B.: “Bridge B-20-133 on US-151 with Fiber Reinforced Polymer Reinforced Concrete Deck,” Final Report No. 1000-02-03, Wisconsin Department of Transportation, 2005, 101 pgs.

43. Bank,L.C., Oliva,M.G., Russell,J.S., Jacobson,D.A., Conachen,M., Ringelstetter,T., Spottiswoode, A., Carter, J., and Henke,R.: “Bridge B-20-148 on US-151with Fiber Reinforced Polymer Reinforced Concrete Deck,” Final Report, No. 1009-03-10, Wisconsin Department of Transportation, 2006, 64 pgs.

44. Bank, L.C., Russell, J.S., Hanus, J.P., Varela-Ortiz, W., Velazquez, G.I. and Ray, J.C.: “Conceptual Studies for Rapidly Deployable Battlespace Gap Structures” Report ERDC/GSL TR-06-25, US Army Corps of Engineers, 2006, 203 pgs.

45. Bank,L.C., Malla, A.P., Oliva, M.G., Russell, J.S., Bentur, A., and Shapira, A.: “Specification and Design of Fiber Reinforced Bridge Deck Forms for Use on Wide Flange T-Girders.” University of Wisconsin, Madison and Wisconsin Department of Transportation, Wisconsin Highway Research Program, SPR #0092-06-07, 2007, 127 pgs.

Other Publications

1. Russell, J.S. (February 7, 2015) Jeffrey S. Russell: UW–Madison is responding to needs for flexible education. Wisconsin State Journal.

2. Russell, J.S.., Cramer, K., and Brower, A. (February 2015) The Wisconsin Idea: Under Siege but Stronger Than Ever. The EvoLLLution: Illuminating the LifeLong Learning Movement.

3. Mangelsdorf, S.C., Russell, J.S., Jorn, L.A., and Morrill, J (March 2015) MOOCs for Wisconsin and the World. EDUCAUSE Review.

4. Russell, J.S. (May 2015) Intra-Institutional Collaboration to Improve Adult Accessibility. The EvoLLLution: Illuminating the LifeLong Learning Movement.

5. Laufer, A., Russell, J. S., & Toomey, R. Agir primeiro, pensar depois: Intuição, ação e reflexão. (Act first, think later: Intuition, action, and reflection.) Mundo Project Management, Vol. 11, No. 65, pp 76-77. Oct/Nov 2015.